ZP580A PoE HAT Expansion Board
|
||
Overview
Introduction
The ZP580A PoE HAT board is an 802.3af/at-compliant Power Over Ethernet accessory for the Raspberry Pi 5. Suitable for use with PoE routers or switches that support the IEEE 802.3af/at networking standard, allowing the Raspberry Pi to be networked and powered over a single cable.
Features
• Based on standard Raspberry Pi 40PIN GPIO header, compatible with Raspberry Pi 5. Pin headers on the top for easy access to other Raspberry Pi expansion boards.
• PoE (Power Over Ethernet) capability, IEEE 802.3af/at-compliant.
• Fully isolated switched-mode power supply (SMPS).
• Onboard high speed active cooling fan, better heat dissipation effect and more stable operation performance.
• Power Over Ethernet: providing both network connection and power supply for your Raspberry Pi in only one Ethernet cable.
• Onboard 5V & 12V header outputs: 5V header provides up to 4.5A output (MAX 25W for 12V+5V total output power). Be able to power extra devices while providing stable power to Raspberry Pi.
• Onboard buck chip: Incorporates original voltage buck chip, providing up to 5A under sufficient heat dissipation condition.
Parameters
• POE input voltage: 37V-57V DC input
• POE - GPIO header: 5V 4.5A (MAX)
• POE - 2P header: 12V 2A (MAX)
• Network standard: Support IEEE 802.3af/at PoE
• Dimensions: 56.5 × 70.0mm
• Weight: 38.7g
Work with Raspberry Pi 5
Connect the ZP580A PoE HAT board to the Raspberry Pi 5 as shown below:
Packing List
Note: The Raspberry Pi 5, switch and Ethernet cable are not included in the package.